Pages: [1]   Go Down
Print
Author Topic: need a track for a 73 GT 292ss  (Read 2688 times)
Lettereat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


View Profile
« on: September 14, 2011, 06:55:25 PM »

has anyone used a track off of another sled on this chassis?
Logged
_FIII
Administrator
Sr. Member
*****

Karma: +7/-0
Offline Offline

Posts: 543


View Profile WWW
« Reply #1 on: September 16, 2011, 06:56:40 PM »

scorpion, chapparral, john deere and many others fit.  Do some searching on here as I explained the size and brands that it fits.  A pretty common track size and not hard to find used in good shape and also available new as well.
Logged

Richard

Regina, SK

www.sasksnowmobile.com
Rupp luver
Guest
« Reply #2 on: October 11, 2011, 05:03:58 PM »

I'm not trying to hi-jack this thread,but the track I took off my 74 Apache was 14 7/8" wide. Also the original? track I took off,had STEEL rods inserted through out it. Just about all the tracks you mention are 15 1/2" wide. I bought a 72 John Deere 400 that had a 14 7/8" wide track,47 drive lugs, 2.52 pitch.
Logged
gp292racer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


View Profile
« Reply #3 on: November 19, 2011, 03:05:43 PM »

2.52 pitch, 47 lug tracks are pretty easy to find. Pretty sure Massey Furgison used them as well.

I have probably pulled 4 or 5 of them off Rollos, some have steel rods, some have fiberglass rods.

I have a Goodyear branded 2.52 pitch track on my Rollo that I race. It's actually lighter than a certain commercially available "racing track"  Roll Eyes
Logged
Pages: [1]   Go Up
Print
Jump to: